CUTTING LINE
 
Photo
Name:  CUTTING LINE 
Sort:   More……More……  
Sort ID:   NO Date  
Click:  6575  Times 
Product Info:

          CUTTING LINE

 



Cutting line compose of lifter jogger and microcomputer program-control paper cutter. It can finish load and unload clean up move of all kinds of paper cutter. It has excellences high efficiency lower intensity of labour short work time debase product cost.
Main features:
1. Ball lead screw and linear guide-rail makes paper impeller run smooth,low noise,accurate  positioning,enhance the cutting precision and speed greatly,prolong the service lift of paper cutter.
2. The working tables are all chrome-plated and equipped with air balls which makes paper-pushing easily and rusty-proof.Large side workingtable(1000*800) is optional.
3. IR photoelectric protection,buttons by two hands safety devices.
4. Safety device for knife bed, overloading protection for cutting,automatic return safety device.
5.  Imported hydraulic components are adopted in hydraulic system,the pressure can be adjusted.The paper is pressed twice by pressure-increased system.
6.  mechanical assistance device for knife replacement makes knife replaced quickly and safely.
7.  optical knife alignment equipped makes cutting more convenient.
8.  chrome-plated working table.
9.  PLC control system.
10. ejecting device for knife bar.
11. flat worm speed reducer transmission.
12. inside electronic knife locker to make the cutting more safety and stable.
13. Multination langueage operation interface.
14. Carry on the block programming operation through the figures and diagrams operation manual.



New high speed paper cutter


Product Introduce
This model adopts Japan AC digit servo control system,10.4 inches colorful liquid crystal display screen of resolution rate is 0.01mm, has self-diagnostic function of troubles and displays the operating pattern. It has 100 program units, more than 10000 different cutting position dynamic cutting display, running situation, dynamic follow-up. The max paper-pushing speed is 5-18m/min, it adopts stronger computer operating system. It can memorize store the storage time can be up to 300000 hours above . It has self maintenance to the operating system. Italy hydraulic components, Germany Japan and korea electric components. Taiwan ball lead screw and linear guide-rail are used. PLC controller can monitor all the electrical and mechanical section. Its key parts adopt imported bearing of low maintenance.
Main features:
1. Ball lead screw and linear guide-rail makes paper impeller run smooth,low noise,accurate positioning,enhance the cutting precision and speed greatly,prolong the service lift of paper cutter.
2. The working tables are all chrome-plated and equipped with air balls which makes paper-pushing easily and rusty-proof.Large side workingtable(1000*800) is optional.
3. IR photoelectric protection,buttons by two hands safety devices.
4. safety device for knife bed, overloading protection for cutting,automatic return safety device.
5. imported hydraulic components are adopted in hydraulic system,the pressure can be adjusted.The paper is pressed twice by pressure-increased system.
6.  mechanical assistance device for knife replacement makes knife replaced quickly and safely.
7.  optical knife alignment equipped makes cutting more convenient.
8.  chrome-plated working table.
9.  PLC control system.
10. ejecting device for knife bar.
11.flat worm speed reducer transmission.
12. inside electronic knife locker to make the cutting more safety and stable.
13. Multination langueage operation interface.
14.Carry on the block programming operation through the figures and diagrams operation manual.



XHYW Computerized Paper Cutters With Large Screen


Product Introduce
This model adopts japanese Mitsubishi AC digit servo control system,10.4inch colorful liquid crystal display screen of resolution rate 0.01mm,hasself-diagnostic function of troubles and displays the operating pattern,dynamic cutting display,running situation,dyna mic follow-up.The max paper-pushing speed is 5-18m/min,it adopts stronger computer operating system.The storage time canbe up to 300000 hours above .It has self maintenance to the operating system.ltaly hydraulic components, japan and korea electric com ponents.Taiwan ball lead screw and linear guide-rail are used.PLC controller can monitor all the electrical and mechanical section.Its key parts adopt imported bearing of low maintenance.
Main Features
1
Ball lead screw and linear guide-rail makes paper impeller run smooth,low noise,accurate   positioning,enhance the cutting precision and speed greatly,prolong the service lift of paper cutter.
2
The working tables are all chrome-plated and equipped with air balls which makes paper-pushing   easily and rusty-proof.Large side workingtable(1000*800) is optional.
3
IR photoelectric protection,buttons by two hands safety devices.
4
Safety device for knife bed, overloading protection for cutting,automatic return safety device.
5
Imported hydraulic components are adopted in hydraulic system,the pressure can be adjusted.The   paper is pressed twice by pressure-increased system.
6
Mechanical assistance device for knife replacement makes knife replaced quickly and safely.
7
Optical knife alignment equipped makes cutting more convenient.
8
Chrome-plated working table.
9
PLC control system.
10
Ejecting device for knife bar.
11
Flat worm speed reducer transmission.
12
Inside electronic knife locker to make the cutting more safety and stable.
Technical parameter

Model

920

1150

1300

1370

Cutting Width

920mm

1150mm

1300mm

1370mm

Max. cutting height without assistance pressing plate

120mm

160mm

130mm

160mm

Max. cutting depth

1100mm

1150mm

1300mm

1450mm

Min. cutting depth without assistance pressing plate

25mm

30mm

30mm

30mm

Extended length of working table

650mm

700mm

730mm

730mm

Height of working table

880mm

880mm

880mm

880mm

Machine width including side working table

2180mm

2380mm

2630mm

2700mm

Total length of working table

2150mm

2220mm

2420mm

2750mm

Cutting speed

40times/min

45 times/min

45 times/min

45 times/min

Max. paper pressure

35000N

40000N

40000N

45000N

Power of main motor

3kw

4 kw

4 kw

4 kw

Motor for paper feeding

037kw

055 kw

055 kw

055 kw

Air pump

055kw

075 kw

075 kw

075 kw

Machine Weight

2800kg

4000kg

4000kg

4800kg

Overall dimensionL*W*H

2280×1400×1850mm

2500×1550×2100mm

2600×1600×2000mm

2880×1600×2100mm




XHYK Computerized Pager Cutters


Product introduce

It is equipped with japanese Mitsubishi AC digital servo controlling technologe ang 5.7 inch display screen,the data resolubles and displays the operating patrern,100 program units,over 5000 different cutting positions ,it can memorize,store and dynamic follow-up.The max paper-pushing speed is 5-16m/min.It adopts ltaly hydraulic components,japan and korea electric components,Taiwan ball lead screw,linear guide-rail.PLC controller can monitor all the electrical and mechanical section.Its key parts adopt importsd bearing of low maintenance.
Main features

1
Ball lead screw and linear guide-rail makes paper impeller run smooth,low noise,accurate positioning,enhance the cutting precision and speed greatly,prolong the service lift of paper cutter.
2
The working tables are all chrome-plated and equipped with air balls which makes paper-pushing easily and rusty-proof.Large side workingtable(1000*800) is optional.
3
IR photoelectric protection,buttons by two hands safety devices.
4
Safety device for knife bed, overloading protection for cutting,automatic return safety device.
5
Imported hydraulic components are adopted in hydraulic system,the pressure can be adjusted.The paper is pressed twice by pressure-increased system.
6
Mechanical assistance device for knife replacement makes knife replaced quickly and safely.
7
Optical knife alignment equipped makes cutting more convenient.
8
Chrome-plated working table.
9
PLC control system.
10
Ejecting device for knife bar.
11
Flat worm speed reducer transmission.
12
Inside electronic knife locker to make the cutting more safety and stable.
Technical parameter

Model

920

1150

1300

1370

Cutting Width

920mm

1150mm

1300mm

1370mm

Max. cutting height without assistance pressing plate

120mm

160mm

130mm

160mm

Max. cutting depth

1100mm

1150mm

1300mm

1450mm

Min.? cutting depth without assistance pressing plate

25mm

30mm

30mm

30mm

Extended length of working table

650mm

700mm

730mm

730mm

Height of working table

880mm

880mm

880mm

880mm

Machine width including side working table

2180mm

2380mm

2630mm

2700mm

Total length of working table

2150mm

2220mm

2420mm

2750mm

Cutting speed

40times/min

45 times/min

45 times/min

45 times/min

Max. paper pressure

35000N

40000N

40000N

45000N

Power of main motor

3kw

4 kw

4 kw

4 kw

Motor for paper feeding

037kw

055 kw

055 kw

055 kw

Air pump

055kw

075 kw

075 kw

075 kw

Machine Weight

2800kg

4000kg

4000kg

4800kg

Overall dimensionL*W*H

2280×1400×1850mm

2500×1550×2100mm

2600×1600×2000mm

2880×1600×2100mm

  
Home       |       About Us       |       News       |       Products       |       Feedback       |       Contact Us